Adding a tone control?

[jimmyt01]

Hi, guys, I mentioned a while back getting a good deal on a Washburn N2. Played with my old band at a 4th of July gig this weekend and had a great time, but really noticed a lack of dimension with just having a volume control and no tone control, so I'm planning on installing one. Currently it has two humbuckers, the three-position switch, the volume switch, and that's it. Anyone have a schematic for adding a tone pot, or suggestions on where to go for same, or suggestions, period? Thanks in advance.

[tle4]

http://www.seymourduncan.com/support...ic=2h_1v_1t_3w

[deflepfan]

Have fun!
Sheila

[jimmyt01]

Hey, thanks so much, folks, you were a big help! Now all I have to do is get the switch!

[deflepfan]

Originally Posted by jimmyt01

Hey, thanks so much, folks, you were a big help! Now all I have to do is get the switch!

You mean the pot(entiometer)! And knob. And wire. And solder!!

Let us know how it goes!
Sheila

[jimmyt01]

I meant to say that.......

[SIXSTRING63]

You might want to check the value of the existing volume pot. Sometimes they used a 1meg. pot to get the most output but this also lets pass through a lot of treble. I would get a good matched set of 500K pots and a good .022uf Sprague orange drop or Mallory tone capacitor.